What this tool adds
What this tool adds to your bench
Choose the TM-001 when the pistol grip and crosscut format suit timber work. The maker describes use on framing timber, logs, square stock and composite panels. That is a different grip and work scale from a long wrapped-handle joinery saw or a small backed saw for fine shoulders.
The 275 mm blade has 10 TPI crosscut teeth. Its stated plate thickness is 0.7 mm and kerf is 1.0 mm. Compare the kerf with your allowance for material removal; blade length is a separate measurement and does not establish a maximum timber diameter.
The replaceable blade is Japanese steel with induction-hardened teeth. The handle construction is ABS resin, TPU and steel, confirmed by the maker’s material section. The complete saw is 465 mm long, with a listed tool weight of 160 g.
Choose it for a dedicated crosscut pull stroke when its handle and available clearance suit the stock. Compare the finer Kataba edge for a different crosscut pitch, or the long Spear & Jackson handsaw for general grain-direction work and a wooden full handle. The replacement blade must match this 275 mm model.
Choose for your actual work
- Compare grip, stroke clearance and tooth pitch against the size of the stock.
- Choose the exact TM-001 replacement rather than a same-length generic blade.
Fit checks & limits
- Compare the actual workpiece and required clearance with the selected saw; no maximum log diameter is specified.
- This is the composite-handle TM-001 format. Do not choose it expecting a wooden handle from a conflicting generic field.
Use & care
Use the pull stroke and follow the model’s replacement-blade instructions.
Questions before you choose
Does 275 mm tell me the largest log it can cut?
It is the blade length. A maximum log diameter also depends on practical access and is not specified here.
Why compare it with a wrapped-handle Kataba?
The grip and crosscut pitch differ. This model has a pistol grip and 10 TPI edge; compare those features with the work and stroke space.
Is the handle wooden like a traditional Japanese saw?
The maker specifies ABS resin, TPU and steel for this model. It is a different handle construction from the wrapped wooden Kataba.