Flexcut PW18 Hook Hone with 400 and 600 Grit Paper

What this tool adds

What this tool adds to your bench

The PW18 is intended for the inside edge of a hook knife, where access differs from an ordinary straight edge. Its shaped, handled format brings abrasive paper to that curve. Choose it when honing out nicks or scratches is the task you need to address.

Flexcut supplies400 and 600 grit abrasive paper and an instructional guide with the hone. Those are the stated abrasive grades for this package. They do not establish an automatic grit progression for every knife steel or every amount of edge damage.

This is an abrasive hone, despite the leather-strop wording in one title. The manufacturer identifies it as the Hook Hone. The SlipStrop is the alternative to compare for profile polishing and deburring, so choose according to the stage of edge maintenance.

Check the contact against the actual inside curve of your knife and follow the supplied instructions. The package and tool-only measurements are not interchangeable, and an exact working-rod diameter is not established here. Other strops, compound bars and sheaths pictured in the family range are separate selections.

Choose for your actual work

• Choose by maintenance stage and access to the inside curve.
• Check the contact against the actual hook profile.

Fit checks & limits

• No exact working-rod diameter or universal curve fit is established.
• Packaged dimensions are not used as tool-only measurements.

Use & care

Use the supplied guide for fitting and using the abrasive paper.