What this tool adds
What this tool adds to your bench
Choose the Crown 195 when a longer backed blade and a full handle suit your joinery work. Compared with the short straight-handled Crown 187, its enclosed grip and 305 mm blade provide a different holding and stroke arrangement. Check the room around the joint as well as the blade length.
The selected tooth specification is 13 TPI. That is a tooth count, not confirmation of a particular rip or crosscut filing. If grain-direction tooth geometry is the deciding factor, compare the explicitly rip-filed Lynx or Temple models rather than inferring it from the Tenon Saw name.
The high-carbon steel blade is described as resharpenable and is stiffened by a brass back. The stained beech handle is fixed with screws. Resharpening capability is a useful ownership comparison with a replaceable-blade system, while the back needs clearance above the cut.
The offer is one complete saw. Its 305 mm figure describes the blade, and the available small generic size field does not establish the complete tool’s footprint. Choose it for the full-handle backed format; confirm usable depth and overall storage dimensions before buying for a close-fitting application.
Choose for your actual work
- Compare the full grip and longer blade with your available stroke space.
- Choose by confirmed tooth geometry if rip or crosscut filing is essential.
Fit checks & limits
- Exact usable depth, complete-tool footprint and filing angle are not established.
- Maker carton quantity does not describe the consumer offer.
Use & care
The blade is described as resharpenable; use guidance matched to its actual tooth pattern.
Questions before you choose
Is it confirmed as rip-filed like the Lynx dovetail saw?
A rip filing is not established for this selected Crown offer. The stated 13 TPI alone does not prove the tooth geometry.
Why compare it with the smaller gents saw?
The 195 has a full handle and longer blade. The 187 has a short backed blade and straight turned handle; compare the grip and room around your joint.
Does the blade length guarantee clearance for a deep shoulder?
No. Usable depth beneath the brass back is a separate measurement and is not specified here.