What this tool adds
What this tool adds to your bench
The useful difference here is the short terminal cutting edge carried on an extended shank. Flexcut describes it for eye and feather detail, cleaning stop cuts and making vertical cuts where space is limited. Compare that contact and reach arrangement with a longer pointed detail blade, rather than choosing only because the knife is called mini.
The maker specifies a 3/8-inch blade bevel length. It does not give a maximum recess depth or a complete overall length through that number. The extended shank changes access, but the handle still needs enough room for the intended approach to the carving.
The selected listing identifies 1095 high-carbon steel and a curved ash handle. Flexcut describes a pencil-style or conventional knife hold. Choose the grip and approach against the detail being worked; a small edge does not by itself guarantee greater control for every user.
This is one complete fixed-blade knife. Compare the KN34 when a longer, slightly skewed pointed detail edge suits the cut, or the FP01 for a tapered full-flat-ground blade and different handle clearance. Retain the KN31 for the confined vertical and stop-cut role that its exposed shank and short edge address.
Choose for your actual work
- Compare the exposed shank and edge contact against the confined cut you need to reach.
- Check room for the handle as well as the small terminal edge.
Fit checks & limits
- No maximum recess depth or quantified blade-flex rating is established.
- The 3/8-inch figure is not overall tool length.
Use & care
Preserve the short skewed edge under Flexcut’s stropping guidance.
Avoid humid storage.
Questions before you choose
Why keep this alongside a longer detail knife?
Its short terminal edge and extended shank provide a different approach to confined vertical and stop cuts. Compare that geometry with your actual work.
Does the longer shank guarantee a particular recess depth?
No maximum depth is specified. Blade approach and room for the handle still determine whether the tool reaches the cut.
Is 3/8 inch the complete exposed blade length?
The maker identifies it as blade bevel length. It does not establish the full exposed shank or overall knife length.