What this tool adds
What this tool adds to your bench
The No. 7 is the long jointer in this selection. WoodRiver identifies truing edges before glue-up and flattening boards or larger surfaces as its intended jobs. Its 22-inchsole provides a longer reference than the general No. 5 jack, so compare it when straightening a longer edge is the purpose of the purchase rather than collecting another nearby bench-plane size.
The V3 assembly has a stress-relieved ductile-iron body, a fully machined adjustable frog and a high-carbon-steel blade. A rear tote and front knob provide two gripping points. The maker describes a larger blade-adjustment wheel, revised rear tote and improved lateral-adjustment mechanism for this version. Those controls still need setup; the tool’s length alone does not guarantee a flat board or a particular finish.
Keep the two width figures separate: the body is 2-7/8 inches wide and the iron is 2-3/8 inches wide. These describe different parts. Use the model and a confirmed replacement reference when choosing a spare, rather than treating the body width or a generic cutting-width field as the required iron width.
Choose the No. 7 for the dedicated long-edge or larger-surface role. Compare the No. 5 if general stock preparation and shorter jointing work are the main needs, or a low-angle block plane for compact fitting work. This offer is one complete No. 7 V3 plane; optional storage sacks, books and shooting boards on the maker’s page are separate products. Confirm carrying weight if portability matters because the published weight fields disagree.
Choose for your actual work
- Compare the length of the edge you intend to true and the room for the stroke with the long-body format.
- For a spare, distinguish the 2-3/8-inch blade from the 2-7/8-inch body and confirm exact 153104W fit.
Fit checks & limits
- Confirm carrying weight before buying for a portable setup: the sources give 5 lb, 9-1/2 lb and 9.8 lb without a settled match.
- Use the confirmed iron width when comparing cutting capacity. The generic 2.88-inch entry describes body width, not blade width.
- Allow for edge preparation and adjustment before finish work, following the maker’s setup instructions.
Use & care
The maker states that initial tune-up is needed. Include sharpening and adjustment in setup before finish work, using the model’s instructions rather than a setting borrowed from a different plane.
Questions before you choose
What does a No. 7 add if I already own a No. 5?
The 22-inch jointer provides the dedicated long reference for truing longer edges and larger surfaces. If general preparation and shorter jointing work are the main needs, the No. 5 may already cover the relevant role.
Which width matters for a replacement iron?
The supported iron width is 2-3/8 inches; 2-7/8 inches is the body width. Confirm the actual No. 7 V3 replacement fit as well as width.
Are the storage sack and shooting board included?
The supported contents are one complete No. 7 V3 plane. Those maker-page recommendations are separate accessories, not extra contents of this offer.